433Mhz Universal Wireless Remote Control Switch DC 12V 4CH Relay Wireless RF Remote Control Switch Transmitter and Receiver for Lights Garage Door Motor Awning
Description Batteries Required? Yes Color 2Receiver and 4 Transmitter(red and black) Coil Voltage 12 Volts Battery Cell Type Lithium Manganese Dioxide Item Weight 11.3 ounces Contact Type Normally Open Batteries 4 CR2032 batteries required. (included) Batteries Included? Yes Measurement System Imperial Color Name 2Receiver and 4 Transmitter(red and black) Package Dimensions 7.87 x 4.53 x 2.36 inches The device has decent transmission distance and is quite flexible in functionality ,Signal stability ,Max range is up to 16.4ft/50m with no obstacle. 4CH Channel Wireless Remote Control. Adjustable working way, on / off. Switch Momentary, Toggle, Latched All remote control switch kits support 433mhz frequency, by which it can delete the old code on the Relay Receiver Module and re-learn a new code when a remote control get lost, so you are always in control of it. The IC storage capacity on the controller is limited. Only 20 remote controllers can be stored. Applications from simple domestic remote control to autonomous control such as, Great for camper LED flood lights, remote trigger for a flame puffer ,entrance, Garage Doors, alarm system, lifting equipment and so on. NOTE: Please email us if you meet any problem, we are always here to help, thanks!
Product Description
433Mhz Wireless RF Switch DC 12V 4CH (4 Transmitter & 2 Receiver) Momentary Mode:
Press and hold the remote button , the relay connects, release the remote button , the relay dis-connects. Usually used for garage door opener. Toggle Mode:
Press once the remote button , the relay connects , press the remote button again , the relay dis-connects . Usually used for lamp or other on/off control. Latched Mode:
Press a button on the remote control, the corresponding relay connects , and the other relays dis-connect. Usually used for one-time event safety or interlock.
The setting of working mode
1. Momentary Mode
:
Press the learn button on the receiving board once
→The indicator light is on, indicating that it has entered the Momentary mode setting state.
Press any button on the remote control to pair→The indicator flashes 3 times.
Set successfully!
2. Toggle Mode
:
Press the learn button on the receiving board twice
→The indicator light is on, indicating that it has entered the Toggle mode setting state.
Press any button on the remote control to pair→The indicator flashes 3 times.
Set successfully!
3. Latched Mode
:
Press the learn button on the receiving board 3 times
→The indicator light is on, indicating that it has entered the Latched mode setting state.
Press any button on the remote control to pair→The indicator flashes 3 times.
Set successfully!
4. 2CH Momentary + 2CH Toggle
:
Press the learning button on the receiving board 4 times
, after the indicator light is on, press any remote control button, the indicator light flashes 3 times, and the setting is successful!
5. 2CH Momentary + 2CH Latched
:
Press the learning button on the receiving board 5 times
, after the indicator light is on, press any remote control button, the indicator light flashes 3 times, and the setting is successful!
6. 2CH Toggle + 2CH Latched
:
Press the learning button on the receiving board 6 times
, after the indicator light is on, press any remote control button, the indicator light flashes 3 times, and the setting is successful!
7. 2CH Latched + 2CH Latched
:
Press the learning button on the receiving board 7 times
, after the indicator light is on, press any remote control button, the indicator light flashes 3 times, and the setting is successful!
8. RESET
:
pressing 8 times
the learning key button on the receiver board , the LED indicator on receiver board will flash for eight times , the existing remote controls are deleted successfully ! Note, before switching any functional mode, please do a reset first!
Receiver Specification
1. Power supply voltage : DC 12V
Load Input / output voltage: 1 ~ 250V
2. Quiescent Current : 5mA
3. Working Frequency : 433Mhz
4. Receiving Sensitivity : -104 dBm
5. Function option:Momentary/Toggle/Latched
6. Modulation Mode:ASK
7. Matching Mode: Intelligent Learning code
8.Output Mode:Dry contact /Voltage output
9. Shell:Yes
10.Working temperature : -30~+80
11. PCB dimension : 68.2 x 48.2 (mm)
Package Included
2 pcs * DC 12V 4CH Receiver (Including Shell)
4 pcs * 4 button Remote Controller
Special discounts
in our store for all products browse now! Do you want the best for your pet ? check our special offers! Browse now! Christmas Browse now!
. NOTE: After the order is placed our system will send automatically the request to the warehouses and will be not possible to cancel. If you place an order by the mistake, please decline the delivery and contact us, and we will refund you =)! For some addresses the shipping couldn't be available, we keep the right to cancel any order for address issues without responsibility and any kind of feedback. Please understand that not all couriers can ship to particular addresses :)!
If you have any kind of issue, please reach us by private message and we will work together for finding the best solution.
njoy your shopping!
You can pay with
Returns Accepted for this item if it's within 30 Days